outdoor fountain illustration

8 Steps You Can Take To Increase Water Pressure In Your Home

Imagine the frustration of turning on the shower and getting a dribble of water instead of a powerful stream. Or having to wait for ages for your bathtub to fill up. These experiences are all too familiar for many homeowners, as weak water pressure can be a common issue in many households. But it doesn’t have to be this way! With just a few simple steps, you can get your home’s water pressure back up and running in no time. As they say, an ounce of prevention is worth a pound of cure – so let’s take a look at 8 steps you can take to increase water pressure in your home. For those handymen out there, think of it like unclogging the drainpipe that runs from the city’s main line into your home – with these instructions, you can easily restore the flow back to its original strength!

Check For Obstructions

It’s important to make sure your water pressure is just right. If it’s too low, you won’t be able to take a satisfying shower. That’s why the first step in increasing your home’s water pressure is to check for obstructions. These can be anything from a faulty pressure regulator, to a clogged aerator on the faucet, or even blockages in the pipes themselves.

To start troubleshooting, grab a wrench and turn off the main water valve. Then, go around your house and check each fixture for any blockages or restrictions that could be preventing the flow of water. You may also want to look around outside for any external problems that could be affecting the pressure.

Once you’ve identified any issues, it’s time to take action. If there’s a broken part like an old regulator, replace it with a new one that fits your system. You may also need to clear out any debris from the aerator or pipes if they’re clogged up with dirt and sediment. With these steps taken, you should start seeing an increase in water pressure throughout your home!

Clear The Water Heater

One of the key steps to improving your home’s water pressure is to take a look at the water heater. This can be an often overlooked source of issues when it comes to your plumbing system and water pressure. It is important to make sure that the water heater is working properly, as this could be the root cause of any problems you are having.

In order to clear out your water heater, it is best practice to flush it out every so often. This will help get rid of any sediment or dirt that may have built up over time, which can decrease the efficiency of your unit and lead to a less than optimal performance. You should also check for any corrosion in your tank, as this could lead to lower water pressure as well.

To maximize the effectiveness of this process, you may want to consider using a specialized descaling solution or vinegar solution when flushing out your unit. These solutions are designed to break down any buildup or debris that might be affecting how your unit functions, allowing you to get the most out of its performance. TIP: Make sure that you turn off your power supply before attempting any DIY repairs on a water heater!

Inspect The Pipes

It’s understandable if you’re hesitant about inspecting the pipes in your home for water pressure problems. After all, this is a job that requires some skill and technical know-how. But don’t worry – with the right tools and supplies, anyone can do it!

First things first – make sure you have all the necessary supplies. You’ll need a wrench, pliers, a hacksaw, and any other specialty tools that may be needed to inspect your pipes. Once you have everything ready to go, it’s time to get started.

Start by looking for any signs of damage or blockage in the pipes. If there are any kinks in your pipes, try to straighten them out using pliers or a wrench. Additionally, check for any obstructions such as rust or sediment build-up which could be reducing water pressure. If you find something blocking the pipe, use a hacksaw to carefully remove it and then flush out the pipe with water until the flow runs clear again.

Now that your pipes are inspected and cleared of blockages if needed, it’s time to take the next step in improving your water pressure at home – installing a pressure regulating valve! A pressure regulating valve will help regulate water flow throughout your home so that everyone has access to consistent water pressure without having to worry about low pressures or fluctuations.

Install A Pressure Regulating Valve

A pressure-regulating valve is a great way to boost your water pressure. It’s a handyman’s best friend and can make all the difference in how your pipes function. Here are just a few of the benefits you’ll find:

• Increased water flow, which will make your daily activities easier to accomplish • Improved water quality, as there will be less chance of sediment buildup or clogs disrupting the flow • Reduced bills as lower pressure usually means less energy is needed to pump through the pipes.

Ensuring that your system has enough pressure is essential, and installing a regulating valve is an easy way to do so. Depending on the type of valves available in your area, you may need to employ a professional plumber to ensure it gets installed correctly. The installation process usually takes around two hours, but once it’s done you should immediately notice an improvement in performance and satisfaction with your home’s plumbing system.

Every home needs a little TLC every now and then, and this simple install can be part of that process for yours. It’s an inexpensive way to give yourself peace of mind when it comes to keeping your plumbing up-to-date and working efficiently. So don’t wait any longer – get started on improving your water pressure today!

Replace A Pressure Reducing Valve

Making your home water pressure higher is like taking a breath of fresh air. It’s a relief, and you can get the job done with just a few steps. So if you’re looking to increase the water pressure in your home, replacing a pressure reducing valve should be on your list.

A pressure reducing valve (PRV) is designed to regulate the amount of water that flows through the pipes, so if it’s not performing as it should, it could be causing low water pressure. Replacing the PRV restores proper flow and can help improve overall water pressure in your home.

To replace the PRV, start by shutting off the main water supply and draining any remaining water from your plumbing system. Then remove the old PRV and install a new one according to instructions. Once installed, turn on the main supply line and check for leaks. If everything looks good, you’ve successfully replaced your PRV and are ready to move onto the next step on your quest for better water pressure: installing a pressure booster pump!

Install A Pressure Booster Pump

One surprising statistic is that a pressure booster pump can increase the water pressure in a home by up to 45 psi. That’s an impressive jump, especially considering the average water pressure in most homes is around 40-60 psi.

Installing a pressure booster pump is one way to quickly and effectively increase your home’s water pressure. It works by increasing the volume of water circulating through your pipes, increasing the amount of water present at fixtures and appliances. The pump also helps keep the pressure consistent, so you won’t have to worry about cases of low-pressure or no-pressure due to fluctuations in demand.

If you’re ready to take on this project yourself, it’s best to start by consulting with a professional plumber or handyman to get an accurate assessment of what supplies and materials are needed. Generally speaking, installation should be relatively straightforward — all you’ll need are some basic tools, plumber’s tape and pipe sealant, as well as some copper piping and fittings. Once everything is in place, simply turn on the pump and you should have higher water pressure in no time!

Checking your home’s water meter is another important step for homeowners who want to optimize their water pressure. This will help give you an idea of how much water usage is going on in your house at any given time so that you can make adjustments as necessary for optimal performance.

Check The Water Meter

Right, let’s move on to the next step: checking the water meter. This is an important part of increasing your home’s water pressure, so it pays to take a few minutes to do it right. First, you’ll need to find your main water shutoff valve. It should be near the water meter – usually outside – and be clearly marked. Once you’ve located it, turn off all the faucets in your house and then turn off the main shutoff valve.

Next, check your meter reading when there’s no flow of water in the house. If it continues to move even when everything is turned off, you may have a leak somewhere in your plumbing system that needs to be fixed before any other steps can yield good results.

If there’s no leakage detected at this stage, start turning on faucets one at a time until you reach the highest pressure point within your home; that’s your current water pressure level. If it doesn’t meet what you’re looking for, we can look into other solutions like increasing pipe size or installing a pressure booster pump. Let’s jump into those next!

Increase The Pipe Size

Increasing the pipe size is a great way to boost your home’s water pressure. It might sound like a big job, but it’s not as daunting as you think. Once you’ve identified the cause of low pressure, it’s time to get to work. All you need is some basic plumbing skills and the right tools and supplies.

First and foremost, decide which pipes are causing the issue. If they’re too small or clogged up, then increasing their size will help solve the problem. You may also want to check for any bends in the pipes that could be restricting flow or obstructing the water pressure.

Once you know what needs replacing or upgrading, it’s time to get shopping! Measure out the length of pipe needed and buy replacements from a hardware store that match your current setup. Then it’s just a case of cutting out the old pipes and fitting in new ones – it’s really that simple! If you’re unsure about doing this yourself, don’t hesitate to call in a professional plumber for assistance.

With larger pipes installed, your home should now have improved water pressure that should stay strong for years to come. Now, let’s look at how installing a water pressure tank can help further enhance your plumbing system’s performance.

Install A Water Pressure Tank

Installing a water pressure tank is a great way to increase the water pressure in your home, just like increasing the pipe size. It is an effective solution if you are looking for a more permanent solution than just increasing the pipe size. This handyman technique will help you make sure that your water pressure is increased and maintained at its optimal level.

When installing a water pressure tank, there are some important things to consider. You’ll need to make sure that you have enough space for the tank, as well as ensure that it is properly connected to your existing plumbing system. Additionally, you will want to make sure you get the right sized tank for your needs. You’ll also need to make sure it’s properly vented so that it can regulate the pressure of the water correctly.

It’s important to keep in mind that installing a water pressure tank isn’t always easy and may require some additional professional assistance from time-to-time in order to ensure it’s functioning correctly. However, if done right, this handyman technique can be an effective way of improving and maintaining your home’s water pressure. With this method in place, you’ll no longer have to worry about low water pressures or other related issues.

Repair Or Replace A Leaky Faucet

The dripping sound of a leaky faucet can be a constant reminder of the frustration of inadequate water pressure. When your home’s water pressure is low, one approach to solving the problem is to repair or replace any damaged fixtures in the plumbing system. Doing so will help restore your home’s water pressure and give you back that sense of satisfaction you had when it was working properly.

For starters, take a look at all the faucets in your house. If you find one that isn’t shutting off completely or has a considerable drip, chances are it needs to be repaired or replaced. You’ll need an adjustable wrench and some plumber’s tape for this job. Unscrew the head of the faucet, wrap up any threads with plumber’s tape and then reattach it securely. If the head is beyond repair, you may need to buy a new one from your local hardware store.

Once you’ve taken care of any leaky faucets, check to make sure there are no other leaks in the plumbing system. Look under sinks and behind appliances for signs of moisture buildup or puddles around pipes. If any areas seem damp or have wet spots, seal them up with some caulk or contact a professional plumber for further assistance. Taking these steps should help increase your home’s water pressure while avoiding expensive repairs down the line.

Check For Leaks In The Plumbing System

Have you ever noticed a decrease in the water pressure in your home? It can be quite frustrating when you’re trying to take a shower and the water pressure is weak. This problem can be solved with just a few simple steps!

The next step to increasing water pressure is to check for leaks in the plumbing system. As handymen, we often recommend starting at the main shut-off valve of your home and checking for any visible signs of leakage. If there are any issues, it’s best to call a plumber as soon as possible to fix it.

Once you’ve checked all of the plumbing fixtures, it’s time to look for air leaks in the pipes. You’ll want to make sure that there are no holes or cracks that could potentially be causing poor water pressure. This is especially important if you have older pipes because they tend to wear down over time and become more prone to leaking. If you find any issues, patch them up with some plumber’s tape and then test out the water pressure again. Transitioning into this next step will help ensure that your home’s water pressure remains strong and steady!

Look For Air Leaks In The Pipes

It is possible that air leaks in pipes could be the cause of low water pressure in a home. To investigate this theory, it is important to check for air leaks throughout the plumbing system. Starting with the main shutoff valve, one should look for drips or puddles around the base of the valve that could indicate an air leak.

Next, one should check all the pipes leading from the main shutoff valve. These pipes should be checked both inside and outside of any walls they may pass through. If any of these pipes are not connected properly or appear to be loose, they should be tightened or replaced if necessary. Additionally, look for holes or cracks in any of these pipes which could also be causing air to enter the system and reduce pressure.

Finally, once all visible pipe connections have been checked and tightened, it is time to move on to replacing showerheads and faucets in order to further increase water pressure in a home. This can be done by removing old fixtures and installing new ones designed specifically for increased water pressure.

Replace The Showerhead

Replacing the showerhead is an easy and cost-effective way to increase water pressure in your home. To maximize efficiency, it’s important to consider a few key points before taking action. Here are three tips for replacing your showerhead:

  • Make sure you have the right tools for the job—a basin wrench or adjustable pliers should do the trick.
  • Turn off the water supply before beginning removal of the old fixture—this will help prevent any potential flooding.
  • Pay attention to how everything is connected so that when it comes time to install the new showerhead, you’ll know just what needs to be done.

Replacing a showerhead can make all the difference in improving water pressure throughout your house! With a few simple steps and some basic tools, you can get started on this DIY project right away and enjoy better functioning showers and sinks in no time.

Replace The Fixture

Now that you’ve replaced the showerhead, it’s time to move on to the next step. Replacing the fixture is a great way to increase water pressure in your home. To do this, you’ll need a new fixture that meets your home’s needs and is compatible with your existing plumbing system. If you’re not sure what type of fixture works best for your situation, consult a professional plumber or handyman.

When changing out the fixture, be sure to turn off the main water valve before starting any work. This will ensure that no water spills out while you make this important change. After turning off the main valve, remove the old fixture using caution and care so as not to damage any pipes or fittings in the process. Then replace with the new one and make sure all connections are properly tightened and secured.

After replacing the fixture, turn on the main water valve again and check for leaks or other issues. If everything seems to be in order, then you can enjoy increased water pressure in your home! But if problems persist after replacing the fixture, it may be time to contact your local water provider for further assistance.

Contact The Water Provider

If you’re still struggling with low water pressure, consider getting in touch with your local water provider. They’ll be able to help diagnose the issue and provide advice on what to do next. This step could be the key to finally getting that increased water pressure you’ve been looking for.

For starters, they may suggest replacing or cleaning out certain parts of the system. In some cases, it’s possible that something like a broken pipe is causing a blockage and reducing the flow of water. If that’s the case, then your water provider can tell you what repairs need to be done in order to get your system back up and running at full capacity.

But if it turns out that your plumbing is all fine and dandy, then there could be other issues at play, such as municipal-level problems or insufficient infrastructure. In this case, your local provider may be able to provide solutions like increasing pipe size or installing additional pumps. So don’t hesitate to reach out – they may have just the solution you need!


The water pressure in your house can make or break your showers, washing dishes, and laundry. By following the 8 steps outlined in this article, you’ll be able to increase the water pressure in your home and have better experiences with all of your household tasks. It may take some time and effort but it’s worth it for the improved performance of all your fixtures.

First, it’s important to check for any obstructions that could be causing a blockage. If these are found, they should be cleared out immediately. After that, you should inspect the pipes and determine if they need to be replaced due to air leaks or corrosion. Once these two steps are completed, you can move onto installing a regulating valve and replacement valves where necessary.

Finally, replacing the showerhead and fixture will make a huge difference in the overall flow of water pressure throughout your home. “A stitch in time saves nine” – so taking care of small problems now can save you from major repair work down the line! With these 8 simple steps, you’ll be able to easily increase water pressure in your home and get back to enjoying those hot showers again!

Leave a Reply

Your email address will not be published. Required fields are marked *