white ceramic bathtub near white wall

How To Clean A Jetted Tub (No More Gunk In The Water!)

The jetted tub—a luxurious symbol of relaxation. But what happens when the water no longer sparkles and the jets are clogged with gunk? It’s time to break out the cleaning supplies! As a handyman, I’m here to show you how to clean a jetted tub quickly and thoroughly.

First, it’s important to understand what causes the build-up of dirt, soap scum, and other debris in your jetted tub. Jetted tubs use air pressure to create thousands of tiny bubbles in the water as part of their cleansing process. Unfortunately, this also leads to a greater accumulation of dirt particles from showering.

Luckily, cleaning a jetted tub doesn’t have to be an intimidating task. With just a few simple steps and some common household items, you can have your jetted tub sparkling like new in no time! Read on for my top tips on how to keep your jetted tub clean and free from gunk.

What Is A Jetted Tub?

A jetted tub is a type of bathtub that uses jets to circulate hot water throughout the tub, creating a massage-like experience. These tubs are commonly used in spas and high-end homes, and can be quite luxurious! However, if not cared for properly, you may find yourself dealing with gunk in your jetted tub. Thankfully, there are some easy steps you can take to keep your jetted tub clean and free from debris.

The first step towards keeping your jetted tub clean is determining its cleaning frequency. This will depend on how often you use the tub and the type of cleaning chemicals you use in it. If you have hard water, for example, it’s important to perform more frequent deep cleans as minerals tend to build up more quickly than in areas with softer water. You should also make sure to use mild detergents or special cleaners specifically designed for jetted tubs during each cleaning session.

Once the cleaning frequency has been determined, it’s time to get down to business! Preparing the bathtub by draining all the water out is essential before starting any type of cleaning process. Next, fill the tub with hot water mixed with a cleaner of your choice and let it sit for at least 20 minutes so that the cleaner can work its magic. Afterward, drain the water again and rinse off any residue before refilling it with cold or lukewarm water and running jets on low speed for about 15 minutes. Finally, empty out all of the water one last time and give your jetted tub a final rinse using a cloth or soft sponge before enjoying a relaxing soak!

Determining The Cleaning Frequency

When it comes to keeping a jetted tub in top condition, determining the right cleaning frequency is key. Knowing when to clean means you can avoid the buildup of gunk and ensure your tub always looks its best. It’s important to establish a routine that fits your lifestyle and needs, so you can keep your tub looking great for years to come.

If you use your jetted tub regularly, then weekly maintenance is recommended. That way, you can make sure any residue that collects from soaps, oils or other substances doesn’t build up too much and become difficult to remove. Additionally, checking the pH balance of the water should be done at least once a month to prevent bacteria growth and ensure a safe bathing environment.

Conversely, if the jetted tub isn’t used much at all, you may only need to clean it every three months or so. Make sure to inspect it before each use regardless of how often it’s used though – this will help keep any dirt or bacteria away and maintain optimal operation of the jetted jets. Taking these steps will ensure your jetted tub remains clean and safe for years down the line.

Supplies Needed For Cleaning

Now that you know how often to clean your jetted tub, let’s talk about what supplies you’ll need to get the job done. Cleaning a jetted tub requires some special items, so check out this list of three must-haves:

  1. A stiff-bristled brush: The jets will need some scrubbing, and a stiff brush is perfect for that.

  2. Baking soda: This is an important ingredient in our cleaning mixture, as it helps to remove dirt and grime from tough spots.

  3. White vinegar: Vinegar is a great disinfectant and deodorizer, so it’s essential for getting your tub sparkling clean!

Gather these supplies and you’ll be ready to tackle the cleaning process with confidence. Once you have everything ready, it’s time to move onto removing the jet covers. To do this properly, you’ll need to find the access panel on the side of your tub; this panel should have screws or clips that can be loosened with a screwdriver or pliers. With that taken care of, the next step is to pull off the jet covers and set them aside until they’re ready for cleaning!

Removing The Jet Covers

Creating a clean jetted tub starts with careful cleaning. Crafting the perfect clean requires considerable care and creativity. Contrary to common belief, a few simple steps can make a big difference in how your jetted tub looks. Here are four key takeaways for removing the jet covers:

  1. Remove the covers carefully – Be sure to use appropriate tools like screwdrivers or wrenches to avoid damaging the coverings.
  2. Clean the covers – Use warm water and a soft sponge or cloth to get rid of dirt, grime, and debris from the covers without scratching them.
  3. Sanitize – To ensure that all germs are killed, use an antibacterial cleaner or sanitizer on the covers after cleaning them.
  4. Place back in place – Once you’ve cleaned and sanitized them, put them back on the jets securely so they won’t come off easily while you’re using your jetted tub.

With these four tips in mind, it’s time to start tackling those jet covers! With some elbow grease and attention to detail it’s easy to get them looking spotless again in no time. Now that we’ve removed those pesky covers, it’s time to focus on getting rid of any gunk that might be left in the jets themselves – something we’ll explore next!

Cleaning The Jets

Did you know that over 8 million hot tubs are sold in the US every year? That’s a lot of jetted tubs that need cleaning! In fact, the fifth and final step to properly clean a jetted tub is cleaning the jets. Let’s explore this process further.

First off, there are several products available for purchase to help remove stubborn gunk from the jets. Jetted tub cleaners come in both powder and liquid form, but either one should do just fine. Simply follow the instructions on the package to ensure you’re using it correctly.

Next, use a soft-bristled brush to fully scrub away any remaining residue within each jet. A toothbrush may work too if necessary. Make sure to thoroughly rinse out any cleaner after scrubbing so there’s no unpleasant residue left behind. It’s also important not to use too much pressure while scrubbing so as not to damage or dislodge any components within the jet itself.

Now that all of the jet covers have been removed and cleaned, your jetted tub is finally ready for its next use! With these five easy steps, you can rest assured knowing your jetted tub is free from gunk and safe for use by family and friends alike! Onwards now to cleaning the surfaces of the actual tub itself—let’s get started!

Cleaning The Tub Surfaces

Like the powerful thrust of a jet engine, there’s no better way to clean and sanitize a jetted tub than with a thorough scrub down. Now that the jets have been cleared of all that pesky gunk, it’s time to move on to cleaning the tub surfaces.

This step is an important one, so don’t take it lightly. Grab your cleaning solution of choice – either store-bought or homemade – and make sure you use rubber gloves for protection. Start at one end of the tub and work your way around, using a sponge or cloth to get into those hard-to-reach places. Don’t forget to wipe down the outside surfaces too. As you clean each area, rinse with warm water and keep going until it sparkles like new!

Once you’re finished cleaning, it’s time for the next crucial step: sanitizing.

Sanitizing The Tub

Making a jetted tub sparkle is no small feat, but with the right approach, it can be done. Like any good handyman knows, sanitizing is an integral step in achieving a spotless tub. To ensure that your jetted tub is squeaky clean and free of germs, here are five essential steps to follow:

• Disconnect the power source from the tub. This will prevent any electric shock while cleaning. • Fill the tub with water and add 3/4 cup of bleach for every 40 gallons of water. • Turn on the jets for at least 15 minutes to circulate the sanitizing solution throughout the pipes and jets and allow it to settle in all crevices and hard-to-reach areas. • Drain out the used sanitizing solution and rinse the entire surface with clean water. • Clean any residue left behind with a soft brush or cloth to get rid of any lingering dirt or grime. After you’re finished scrubbing, your jetted tub should feel like new! Now that you’ve accomplished one step in this arduous endeavor, you can move on to refilling your freshly sanitized jetted tub with fresh water – one more step closer to having a sparkling clean bathtub!

Refilling The Tub

“An ounce of prevention is worth a pound of cure.” Cleaning a jetted tub regularly can help prevent the need for drastic measures. Refilling the tub after cleaning it is just as important as cleaning itself. Here’s how to do this job right.

First, you’ll need to turn off all power to the tub and make sure any jets are closed, then connect your garden hose to the drain and open it up. This will allow water to fill back in the tub and flush out any remaining debris or residue from the cleaner that may have been left behind. Once the water level reaches its normal setting, you can close off the hose and turn on the power so that all jets are operational again.

Now comes the tricky part – getting everything balanced correctly. Check your owner’s manual for precise instructions on how much of each chemical should be added to achieve optimal performance and avoid damage to your jetted tub system. Then, add these chemicals one at a time following manufacturer instructions, allowing enough time between each addition for them to mix and balance properly before adding more chemicals.

Once you have added all necessary chemicals, run a few hot cycle tests with jets turned on high for about 10 minutes each until you’re satisfied with how everything is running smoothly. This will ensure that your jetted tub is ready for use again without any gunk or residue in its water!

Resetting The Tub System

It’s the last lap of getting your jetted tub ready for use! Resetting the tub system is the cherry on top – so let’s make sure it’s done right. It’s like putting a jigsaw puzzle back together; all those pieces need to fit perfectly.

First, you’ve gotta disconnect the power and water sources before doing anything else. Then, replace the filters with new ones – no ifs, ands or buts about it. Next, fill up the tub until it’s at least half-full of fresh water, then turn on all jets to purge out any lingering debris. Once that’s done, reconnect both power and water sources and get ready to take a dip!

Alrighty folks, now comes the important part: testing to make sure everything is working properly. Run each jet individually and make sure they’re all running smoothly. In addition, check that there are no leaks coming from any of the connections or pipes in the system. If everything looks good, then congratulations – you’ve successfully reset your jetted tub!

Additives To Avoid

When it comes to cleaning your jetted tub, there are certain additives that you should avoid. These can damage the jet system and could cause problems down the line. It’s important to know what not to use so that you can keep your jetted tub in top shape.

The first thing to avoid is bleach or other chlorine-based cleaners. They can corrode the pipes and create a build-up of gunk inside them. This will eventually lead to clogged jets and a decrease in efficiency. If you need something powerful to clean tough stains, try using a non-chlorine based cleaner like baking soda or vinegar instead.

You should also steer clear of harsh abrasive cleaners like steel wool pads or scrubbing brushes. These can scratch and corrode the surface of the tub, resulting in an unsightly appearance as well as plumbing problems down the road. Stick with gentle cleansers for best results.

Regular maintenance tips are key for keeping your jetted tub functioning properly for years to come. A few preventative measures go a long way toward ensuring that your tub stays healthy and free of gunk!

Regular Maintenance Tips

Cleaning a jetted tub can be compared to the art of sculpting. You need to know exactly how to go about it in order to get the desired results. Regular maintenance is just as important as the initial cleaning process, so let’s look at some tips for keeping your jetted tub looking and functioning its best.

Similar to a piece of fine art, regular maintenance will help ensure your jetted tub is in tip-top shape at all times. It’s important to clean the tub regularly, particularly after each use, in order to prevent build up of soap scum and other debris that may cause damage over time. Cleaning doesn’t have to be a hassle; simply wipe down the walls of the tub with warm soapy water and a soft cloth or brush.

For even deeper cleaning, you may want to consider using an enzymatic cleaner specifically designed for jetted tubs. Enzymatic cleaners are formulated with natural ingredients that break down organic substances like oils and soaps that can accumulate in the jets and pipes of the tub over time. Simply follow the manufacturer’s instructions and use these products once every two weeks or so to keep your jetted tub running like new!

Now that we’ve covered regular maintenance tips on how to keep your jetted tub clean, let’s move onto troubleshooting common issues.

Troubleshooting Common Issues

When it comes to jetted tubs, troubleshooting common issues can be a tricky business. To help you out, here’s a handy guide that will have your jetted tub running like new in no time! From understanding the basics of jets and pumps to identifying and addressing simple problems, we’ll have your jetted tub back in tip-top shape.

First off, let’s go over the basic elements of a jetted tub: jets and pumps. The jets are what shoot air into the water to create bubbles and massage your muscles while the pump circulates water around the tub. Knowing these components can help you quickly identify and resolve any potential problems with your jetted tub. Here are four things to look out for:

  1. Clogged or blocked jets – Make sure none of the jets are clogged or blocked, as this could reduce their effectiveness or cause water to overflow onto the floor.
  2. Blown fuses – If one or more of your jets aren’t working properly, make sure you check all fuses connected to them before going any further.
  3. Leaks – Look for visible leaks anywhere on the unit from hoses, pipes, and fittings that might indicate a problem with one of its components.
  4. Low pressure – Low pressure is usually caused by an issue with either the pump or filter system; if you notice this, check both for damage or clogs before replacing them if necessary.

Now that we’ve gone over some common issues that may arise when dealing with a jetted tub, it’s time to decide whether DIY cleaning is right for you or if it’s best left to professionals…

Diy Vs. Professional Jetted Tub Cleaning

When it comes to cleaning a jetted tub, you have two options – do it yourself or hire a professional. DIY jetted tub cleaning requires the right know-how and supplies. It’s best to start by draining the tub and removing the filter. Then use detergents specifically designed for jetted tubs, as they are powerful enough to get rid of any gunk in the water. If you’re comfortable taking apart your jetted tub, you can also clean certain components separately like the jets and pipes.

On the other hand, it’s also possible to hire a professional to help with your jetted tub cleaning needs. Pros will be able to safely and effectively get rid of any dirt or debris that might have built up in the system. They’ll know exactly how your model works and will be able to provide a thorough job without damaging any parts or causing leaks. Plus, they’ll be able to give you advice on how best to take care of your jetted tub in the future so it stays clean for longer.

So when you have a gunky jetted tub, don’t panic! Whether you choose to tackle it yourself or hire someone else for help, there’s no need for more gunk in the water! Now that we’ve gone over DIY vs professional jetted tub cleaning, let’s look at some of the health benefits of having a clean one…

Health Benefits Of Cleaning A Jetted Tub

The health benefits of cleaning a jetted tub are like a breath of fresh air – quite literally! Not only does it help rid the tub of bacteria and other germs, but it also helps keep the air in your bathroom free from unpleasant odours. Keeping a jetted tub clean is one of the most important things you can do for your home and health.

Cleaning a jetted tub on a regular basis prevents the growth of mold, mildew, and algae. These organisms can be hazardous to your respiratory system and cause skin irritation. With proper care, you’ll be able to enjoy your hot water therapy session without having to worry about any harmful toxins or allergens in the air.

In addition to preventing air pollution, keeping your jetted tub clean will also help conserve energy. Without regular maintenance, dirt and debris can build up over time, causing your jets to become clogged and reducing their efficiency. A well-maintained tub will run more efficiently at lower temperatures which means you’ll save money on energy bills each month.

So whether you’re looking to improve your overall health or just save some money on utilities, taking good care of your jetted tub is definitely worth the effort! By following safety tips when cleaning it, you can ensure that both you and your family stay safe while enjoying its many benefits.

Safety Tips To Follow When Cleaning A Jetted Tub

Cleaning a jetted tub can feel like walking a tightrope – one wrong move and you could end up with an even bigger mess. But, don’t worry! With the right safety tips, you can keep your feet firmly on the ground while cleaning your way to a sparkling oasis.

First things first: know what kind of cleaner to use. Chemical-based cleaners should be avoided as they can damage the components of the tub and corrode the pipes. Instead, opt for eco-friendly cleaners that are specifically designed for jetted tubs. Not sure which one to choose? Ask your local handyman for advice!

Next, make sure you protect yourself by wearing gloves and safety glasses when cleaning your jetted tub. This will help protect your skin and eyes from any possible irritants in or around the water. Also, if you’re using a corded vacuum cleaner, make sure it’s unplugged before you start using it in order to avoid electric shocks or other injuries.

Finally, be mindful of where you’re vacuuming as some areas may contain electrical components that could be damaged if they come into contact with liquids or debris. With these tips in mind, you’ll be able to clean your jetted tub safely and effectively!


The importance of keeping your jetted tub clean is paramount. Not only will it ensure that the water you use is free from any bacteria or other contaminants, but it will also make your bathing experience much more enjoyable. Taking the time to properly clean your jetted tub can be a daunting task, but if done correctly, you’ll be able to reap the health benefits and enjoy cleaner, better-smelling water for years to come.

Cleaning a jetted tub may seem like a tedious chore, but don’t let that discourage you from taking on the endeavor. With the right supplies and knowledge, you can make your jetted tub as good as new in no time! Plus, it’s an invaluable resource when it comes to improving your bath time experience – just think of all those luxurious bubbles! To quote a wise man: “A clean bathtub is a happy bathtub.”

So don’t wait any longer – grab those cleaning supplies and get scrubbing! You’ll be glad you did once you’re soaking in all that warm blissful water with no gunk in sight. With regular maintenance and care, your jetted tub will stay looking its best for years to come.

Leave a Reply

Your email address will not be published. Required fields are marked *